X-Rite 890 Color Process Control Densitometer Instruction Manual download pdf (Page 16)

SECTION ONE

1-8

Single Pass

Single pass strips require the strip to be inserted into the instrument once.

In this example, the strip—Kodak RA4—can be inserted in either direction.

Refer to your Control Strip and Balance Print Format Guide for information

on all strips supported.

20 30

Multi Pass

Typically, a multi pass strip requires three pass through the instrument to

obtain measurement data. The instrument displays what color patches are

measured and what guide is used to insert the strip from.

In this example, the cyan—Fuji CP21—row of patches is measured first,

followed by the magenta and yellow. Refer to your Control Strip and

Balance Print Format Guide for information on strip insertion direction.

20 30

READ k:RA–4 ALL

AT<18

18>other

READ f:CP21 CYN

AT<17

26>other

Indicates cyan patches are measured

Guide number flashes, indicting

strip positioning

PASS ONE

Indicates ALL patches are measured

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 51 52

No comments

X-Rite 890 Color Process Control Densitometer Instruction Manual Page 16