X-Rite PlateScope Calibration Plaque User's Guide download pdf (Page 19)

PLATESCOPE

Information Mode

This screen contains technical information about the instrument, and an option to restore the

configuration settings to their factory defaults.

The information area lists the serial number, cal plaque number, firmware date code, and BIOS

version. The system status should display “OK” if the instrument is working properly. If an error is

present, a number would be displayed indicating the problem. You would need to contact X-Rite

to have the condition diagnosed by a Customer support representative. Please refer to the

Appendices section of the manual for contact information.

To access the information mode:

1. From the Configuration screen, use the Navigation Ring to move the highlight focus to the

Info icon.

2. Press the Select button.

3. Press the right side of the Navigation Ring to quickly move the highlight focus to the Exit

icon.

4. Press the Select button to exit back to the previous screen.

Load Defaults

The load defaults function is used to restore the instrument’s configuration settings back to their

original factory settings, and erase any stored strips.

To load defaults:

1. From the Information screen, use the Navigation Ring to move the highlight focus to the

Load Defaults icon.

2. A warning message appears asking you if you would like to continue. Use the Navigation

Ring to move the highlight focus to the checkmark (√) icon.

3. Press the Select button.

Exit

Instrument

information

Restore factory

configuration

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

No comments

X-Rite PlateScope Calibration Plaque User's Guide Page 19