X-Rite 504 SpectroDensitometer Operator's Manual Page 110
- Page / 126
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
CHAPTER FIVE
5-56
Electronic Function Selection (518, 528, 530 only)
EFS automatically recognizes the patch type measured
without manually selecting the function. The "smart"
recognition of Paper, Dot, Solid, PC, Density, Trap, H/G,
and Color is contained in this function. Color only
appears on the 528 and 530 instruments.
NOTE: If the highlight in the measurement list does not move to the
desired function after a measurement, use the Tab keys $@ to move
the highlight to the function before releasing the instrument.
Setting Options
Pressing the Enter key # with the Options menu highlighted
opens the EFS Options menu. The OP Setting, Ref 3 Setting,
and Mode options are selected under this menu item.
OP Setting
The Overprint option allows you to choose Trap, H/G, or
Color. When the option is set to Trap, the instrument
automatically switches to the Trap function when an
overprint is measured. When the option is set to H/G, the
highlight moves to Hue/Grayness when an overprint is
measured and displays H/G data. And when the option is set
to Color, the highlight moves to Color when an overprint is
measured and displays color data.
Ref 3 Setting
The Ref 3 Setting option allows you to select between Dot
and Print Contrast (PC). When set to PC, Print Contrast
data appears after a 75% tint measurement. And when set
to Dot, Dot data appears after a tint measurement.
Mode
The Mode allows you to select between Absolute and
–Paper.
EFS Options:
OP Setting :Trap
Ref 3 Setting :Dot
Mode :Absolute
<Edit Options>
Trap, H/G, Color
Dot or PC
A
bsolute or -Paper
- 500 Series 1
- CE DECLARATION 6
- RoHS/WEEE 6
- Table of Contents 7
- Appendices 10
- Proprietary Notice 11
- Warranty Information 12
- 1. Overview and Setup 13
- Features 14
- Automatic Shut-Off 14
- Patch Smarts Recognition 14
- Drag-n-Drop Override 14
- Hi-Fi Color Capability 14
- Unpacking and Inspection 15
- Shoe Lock Operation 15
- Applying Power 16
- Charging the Battery Pack 17
- CHAPTER ONE 18
- Serial I/O Port 18
- 2. User Interface 21
- Tab Down key 22
- Tab Up key 22
- Enter key 22
- Escape key 22
- Main Menu key 22
- V 0.06 23
- Measurement Data 24
- User Dialog 24
- Current Status or Illum/Obs 24
- Selecting from a List 26
- Editing a Value 26
- 3. Instrument Calibration 27
- Full Calibration 29
- General Information 31
- Language 32
- Active Functions 32
- L*a*b* Method 33
- Lightness or 35
- Chromaticity menu 35
- CIE94 Tolerancing 35
- Precision 36
- Density Options 37
- Gray Set 39
- Calibration Options 40
- Enter Reflectances 41
- Cal Alert 42
- Serial Port Options 42
- Baud Rate 43
- Hand Shake 43
- Auto Xmit 44
- Separator 45
- Delimiter 45
- Protocol 45
- Emulation 46
- Power Down Option 46
- Speed Read Option 47
- Display 48
- Contrast 48
- Orientation 49
- Security 49
- Patch Smarts 50
- User Configuration 51
- Load Factory Defaults 52
- %. Boot momentarily 52
- Yes. Selecting 53
- CHAPTER FOUR 54
- 4. Instrument Functions 55
- Measuring Paper 57
- Paper. <Measure Paper> 58
- Completed> is displayed 58
- Sample 58
- Measuring a Density Sample 60
- E Method, Observ Angle, or 64
- Reference option 64
- a* —0.05 65
- b*—33.12 65
- L* 31.06 65
- Seq or Match) 66
- Ref 01, and a 66
- Ref 02. This 66
- Measuring a Color Sample 67
- L*a*b* (color space), Lab 68
- Eab 1.52 69
- L* —0.51 69
- Reflectance Graph (530 only) 70
- L* 34.94 71
- Active Group option 72
- INSTRUMENT FUNCTIONS 73
- Enter key # 73
- Measuring References 74
- Matching Samples 75
- ΔEab 0.18 76
- ΔEab 0.24 76
- ΔEab 0.25 76
- ΔEab 0.29 76
- Dot Measurement Mode 78
- Color option 79
- Solid. <Measure Solid> 83
- Auto (or a single color) 83
- V 0.13 85
- V 3.64 86
- Dmax is 87
- Enter Dmax> appears in 87
- Dmax menu 87
- References 89
- Store option and press 89
- C/Y 91% 90
- C/Y 2% 90
- Edit Ref option 95
- Reference Menu 95
- Save & Exit 95
- Y —> C 98
- C —> Y 99
- Br 85% 101
- Ct 2% 101
- Clear Ref 101
- C — > M 102
- ΔV 0.01 106
- ΔC 0.01 106
- ΔM 0.02 106
- Reference 107
- Comparing Samples 108
- ΔE 0.12 109
- Setting Options 110
- Measuring Samples 111
- CHAPTER FIVE 112
- Repair Information 113
- Cleaning the Instrument 114
- General Cleaning 114
- Cleaning the Optics 114
- Battery Pack Replacement 115
- Aperture 117
- CHAPTER SIX 120
- 6. Appendices 121
- Error Messages 122
- Parts List 123
- Packaging 124
- P/N 528-500 Rev 126
Related products and manuals for Densitometers X-Rite 504 SpectroDensitometer
Densitometers X-Rite vipFLEX2 Specifications
(76 pages)
(76 pages)
Densitometers X-Rite 948 User Manual
(73 pages)
(73 pages)
Densitometers X-Rite MA48 User Manual
(38 pages)
(38 pages)
© 2020, manymanuals.com. All rights reserved. | 4.780 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals