X-Rite 504 SpectroDensitometer Operator's Manual Page 68
- Page / 126
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
CHAPTER FIVE
5-14
You are now ready to begin taking measurements to
check color values. The type of measurement data that
displays depends on the way you set up your instrument
earlier in this section.
To measure a sample:
1. Make sure Sample is highlighted on the screen and
center the target window over area to be measured.
2. Lower unit to target window and hold closed.
3. Once measurement data is displayed, release the unit.
4. Measurement data appears either as actual color
values or difference values.
Viewing Actual Color and Color Difference Data
There are several different combinations of mode and
method settings that affect the way the measurement data
is displayed.
Actual Color Measurements
If you set the color options to
L*a*b* (color space), Lab
(tolerance), and
2deg observer, your measurement data
appears like this:
Color Difference Measurements
If you set the color options to
L*a*b* (color space), Lab
(tolerance),
2 degree observer and reference 2, your
measurement data appears like this:
Delta values appear, indicating the sample difference.
COLOR Options
Sample
L* 30.06
a* 0.10
b*—36.55
<Completed>
D50/2
Current Illuminant
Observer
COLOR—REF02 Options
Sample
Refere
ΔEab 0.53
ΔL* —0.52
Δa* 0.11
Δb* –0.02
<Completed>
D50/2
Delta Difference
Indicates reference
used
- 500 Series 1
- CE DECLARATION 6
- RoHS/WEEE 6
- Table of Contents 7
- Appendices 10
- Proprietary Notice 11
- Warranty Information 12
- 1. Overview and Setup 13
- Features 14
- Automatic Shut-Off 14
- Patch Smarts Recognition 14
- Drag-n-Drop Override 14
- Hi-Fi Color Capability 14
- Unpacking and Inspection 15
- Shoe Lock Operation 15
- Applying Power 16
- Charging the Battery Pack 17
- CHAPTER ONE 18
- Serial I/O Port 18
- 2. User Interface 21
- Tab Down key 22
- Tab Up key 22
- Enter key 22
- Escape key 22
- Main Menu key 22
- V 0.06 23
- Measurement Data 24
- User Dialog 24
- Current Status or Illum/Obs 24
- Selecting from a List 26
- Editing a Value 26
- 3. Instrument Calibration 27
- Full Calibration 29
- General Information 31
- Language 32
- Active Functions 32
- L*a*b* Method 33
- Lightness or 35
- Chromaticity menu 35
- CIE94 Tolerancing 35
- Precision 36
- Density Options 37
- Gray Set 39
- Calibration Options 40
- Enter Reflectances 41
- Cal Alert 42
- Serial Port Options 42
- Baud Rate 43
- Hand Shake 43
- Auto Xmit 44
- Separator 45
- Delimiter 45
- Protocol 45
- Emulation 46
- Power Down Option 46
- Speed Read Option 47
- Display 48
- Contrast 48
- Orientation 49
- Security 49
- Patch Smarts 50
- User Configuration 51
- Load Factory Defaults 52
- %. Boot momentarily 52
- Yes. Selecting 53
- CHAPTER FOUR 54
- 4. Instrument Functions 55
- Measuring Paper 57
- Paper. <Measure Paper> 58
- Completed> is displayed 58
- Sample 58
- Measuring a Density Sample 60
- E Method, Observ Angle, or 64
- Reference option 64
- a* —0.05 65
- b*—33.12 65
- L* 31.06 65
- Seq or Match) 66
- Ref 01, and a 66
- Ref 02. This 66
- Measuring a Color Sample 67
- L*a*b* (color space), Lab 68
- Eab 1.52 69
- L* —0.51 69
- Reflectance Graph (530 only) 70
- L* 34.94 71
- Active Group option 72
- INSTRUMENT FUNCTIONS 73
- Enter key # 73
- Measuring References 74
- Matching Samples 75
- ΔEab 0.18 76
- ΔEab 0.24 76
- ΔEab 0.25 76
- ΔEab 0.29 76
- Dot Measurement Mode 78
- Color option 79
- Solid. <Measure Solid> 83
- Auto (or a single color) 83
- V 0.13 85
- V 3.64 86
- Dmax is 87
- Enter Dmax> appears in 87
- Dmax menu 87
- References 89
- Store option and press 89
- C/Y 91% 90
- C/Y 2% 90
- Edit Ref option 95
- Reference Menu 95
- Save & Exit 95
- Y —> C 98
- C —> Y 99
- Br 85% 101
- Ct 2% 101
- Clear Ref 101
- C — > M 102
- ΔV 0.01 106
- ΔC 0.01 106
- ΔM 0.02 106
- Reference 107
- Comparing Samples 108
- ΔE 0.12 109
- Setting Options 110
- Measuring Samples 111
- CHAPTER FIVE 112
- Repair Information 113
- Cleaning the Instrument 114
- General Cleaning 114
- Cleaning the Optics 114
- Battery Pack Replacement 115
- Aperture 117
- CHAPTER SIX 120
- 6. Appendices 121
- Error Messages 122
- Parts List 123
- Packaging 124
- P/N 528-500 Rev 126
Related products and manuals for Densitometers X-Rite 504 SpectroDensitometer
Densitometers X-Rite vipFLEX2 Specifications
(76 pages)
(76 pages)
Densitometers X-Rite 948 User Manual
(73 pages)
(73 pages)
Densitometers X-Rite MA48 User Manual
(38 pages)
(38 pages)
© 2020, manymanuals.com. All rights reserved. | 4.164 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals