X-Rite 504 SpectroDensitometer Operator's Manual Page 72
- Page / 126
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
CHAPTER FIVE
5-18
ΔE Method
The instrument supports three tolerancing methods: CMC,
Lab, and CIE94. Displayed data automatically updates to the
selected method after you exit.
CMC- is an ellipsoidal tolerance method that attempts to
correlate small measured color differences with visual
assessment.
Lab - establishes constant limits for lightness, red/green, and
yellow/blue values. L*a*b* tolerance cause color difference to
be limited by a rectangular box in color space.
CIE94 - is similar to CMC ellipsoidal tolerance method.
However, calculations are based on L*C*h° data.
Observer Angle
The available viewer angles are: 2° and 10°. The 2° observer
is based on a commonly accepted description of the average
human viewer. If the field of view is larger than 2°, the 10°
observer should be used. Displayed data automatically updates
to the selected angle after you exit.
Illuminants
You can choose from several illuminant options for viewing
data. Displayed data automatically updates to the selected
illuminant after you exit. Available illuminants are: A, C, D50,
D55, D65, D75, F2, F7, F11, and F12.
Active Group
The Active Group option is used to select, create and delete
groups. A total of 10 groups can be created to store a total of
1,424 samples. A group name can consist of up to 20
characters.
To select a group:
1. With the Match Options menu displayed, press the
Tab Up key $ or Tab Down key @ to highlight
Active Group option.
2. Press the Enter key # to access editor.
3. Use the Tab keys $@ to move the highlight to the
desired group name and press the Enter key #.
The group selected will now become the active group
with references.
- 500 Series 1
- CE DECLARATION 6
- RoHS/WEEE 6
- Table of Contents 7
- Appendices 10
- Proprietary Notice 11
- Warranty Information 12
- 1. Overview and Setup 13
- Features 14
- Automatic Shut-Off 14
- Patch Smarts Recognition 14
- Drag-n-Drop Override 14
- Hi-Fi Color Capability 14
- Unpacking and Inspection 15
- Shoe Lock Operation 15
- Applying Power 16
- Charging the Battery Pack 17
- CHAPTER ONE 18
- Serial I/O Port 18
- 2. User Interface 21
- Tab Down key 22
- Tab Up key 22
- Enter key 22
- Escape key 22
- Main Menu key 22
- V 0.06 23
- Measurement Data 24
- User Dialog 24
- Current Status or Illum/Obs 24
- Selecting from a List 26
- Editing a Value 26
- 3. Instrument Calibration 27
- Full Calibration 29
- General Information 31
- Language 32
- Active Functions 32
- L*a*b* Method 33
- Lightness or 35
- Chromaticity menu 35
- CIE94 Tolerancing 35
- Precision 36
- Density Options 37
- Gray Set 39
- Calibration Options 40
- Enter Reflectances 41
- Cal Alert 42
- Serial Port Options 42
- Baud Rate 43
- Hand Shake 43
- Auto Xmit 44
- Separator 45
- Delimiter 45
- Protocol 45
- Emulation 46
- Power Down Option 46
- Speed Read Option 47
- Display 48
- Contrast 48
- Orientation 49
- Security 49
- Patch Smarts 50
- User Configuration 51
- Load Factory Defaults 52
- %. Boot momentarily 52
- Yes. Selecting 53
- CHAPTER FOUR 54
- 4. Instrument Functions 55
- Measuring Paper 57
- Paper. <Measure Paper> 58
- Completed> is displayed 58
- Sample 58
- Measuring a Density Sample 60
- E Method, Observ Angle, or 64
- Reference option 64
- a* —0.05 65
- b*—33.12 65
- L* 31.06 65
- Seq or Match) 66
- Ref 01, and a 66
- Ref 02. This 66
- Measuring a Color Sample 67
- L*a*b* (color space), Lab 68
- Eab 1.52 69
- L* —0.51 69
- Reflectance Graph (530 only) 70
- L* 34.94 71
- Active Group option 72
- INSTRUMENT FUNCTIONS 73
- Enter key # 73
- Measuring References 74
- Matching Samples 75
- ΔEab 0.18 76
- ΔEab 0.24 76
- ΔEab 0.25 76
- ΔEab 0.29 76
- Dot Measurement Mode 78
- Color option 79
- Solid. <Measure Solid> 83
- Auto (or a single color) 83
- V 0.13 85
- V 3.64 86
- Dmax is 87
- Enter Dmax> appears in 87
- Dmax menu 87
- References 89
- Store option and press 89
- C/Y 91% 90
- C/Y 2% 90
- Edit Ref option 95
- Reference Menu 95
- Save & Exit 95
- Y —> C 98
- C —> Y 99
- Br 85% 101
- Ct 2% 101
- Clear Ref 101
- C — > M 102
- ΔV 0.01 106
- ΔC 0.01 106
- ΔM 0.02 106
- Reference 107
- Comparing Samples 108
- ΔE 0.12 109
- Setting Options 110
- Measuring Samples 111
- CHAPTER FIVE 112
- Repair Information 113
- Cleaning the Instrument 114
- General Cleaning 114
- Cleaning the Optics 114
- Battery Pack Replacement 115
- Aperture 117
- CHAPTER SIX 120
- 6. Appendices 121
- Error Messages 122
- Parts List 123
- Packaging 124
- P/N 528-500 Rev 126
Related products and manuals for Densitometers X-Rite 504 SpectroDensitometer
Densitometers X-Rite vipFLEX2 Specifications
(76 pages)
(76 pages)
Densitometers X-Rite 948 User Manual
(73 pages)
(73 pages)
Densitometers X-Rite MA48 User Manual
(38 pages)
(38 pages)
© 2020, manymanuals.com. All rights reserved. | 3.043 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals